Diagnosing Low Water Pressure in Your Home

Low Water PressureLow water pressure can affect your toilet, your shower, and even your kitchen sink. While pressure problems may seem minor, they can actually signify a major problem if you do not take action and uncover the root of the cause.

There are a number of different problems throughout your plumbing pipes that can lead to low pressure, and if you fail to diagnose the problem and find the right water pressure fix, you may end up shelling out a large sum of money to fix a greater problem in the long run. If you have noticed water pressure problems, read the tips below to see if you can solve the problem all on your own.

Steps to Diagnosing the Root Cause of Your Water Pressure Problems

Step #1: Contact Your Utility Company

If you have experienced a sudden drop in pressure, it’s always best to contact your utility company before you start inspecting your piping. If there is work being done on the public water system or the sewage system, you may experience a drop in pressure until the work is done. If there is no work being done in your area, proceed to the next step.

Step #2: Check your Valves

Your shut-off valves are generally located where the pipes outside of your home come into your property. Locate there shut-off valves and check to see if the valves are partially closed. If the valves have been turned even a fraction of an inch, it can affect your pressure. Turn the valves fully to the open position and see if this solves the problem without having to turn to a plumber in St. Paul.

Step #3: Inspect the Condition of Your Valves

If the valves are open, inspect the valves for corrosion or wearing. If these valves are corroded or damaged in any way, you may need to install new valves or call a plumber to do so for you.

Step #4: Check Your Fixtures

If your water pressure is low in the bathroom, but not in other areas of your home, you may have a localized problem. Check your fixtures in the area where you’re experiencing a problem and see if there is some type of blockage. If you can detect the blockage, it may be time to schedule an appointment for plumbing repair.

Stuck? Call in the Pros

Keep these tips in mind if and when you experience problems with the water pressure in your home. If none of these tips work or you need help installing new fixtures or clearing a clog, contact Benjamin Franklin Plumbing of Minneapolis for help by calling 952-933-8888.

Like this post? Share it! Share on Google+Pin on PinterestTweet about this on TwitterShare on Facebook

Leave a Reply